INOR IsoPAQ-30P Isolation Transmitter

Basic 1-channel isolation transmitter for unipolar 0–20 mA, 4–20 mA, and 0–10 V signals with calibrated range selection, 3-port isolation, and universal 20…253 VAC/DC supply.

Key advantages

• Calibrated range selection — switch among 0–20 mA / 4–20 mA / 0–10 V in/out without recalibration kits.
• Universal supply — 20…253 VAC/DC; one spare covers AC and DC panels.
• 3-port isolation — 2.5 kV, 50 Hz; 600 VAC/DC working voltage.
• 12.5 mm DIN-rail — plug-in screw terminals; high-density mounting.

Typical applications

• Basic galvanic isolation and mA↔V conversion on unipolar process signals.
• Panels needing one stocked isolator for both AC and DC supplies.
• Cost-sensitive loops where 0.3% FS accuracy is acceptable.

Selection guide

• I/O — Input/output: 0…20 mA, 4…20 mA, 0…10 V (unipolar).
• Accuracy — Typical 0.3% FS.
• Bandwidth — Cut-off (−3 dB) 1 kHz.
• Environment — Ambient −10…+60 °C (OEM specs); 12.5 mm × 104 mm depth.
• Vs 40P — Step up to IsoPAQ-40P for 0.1% FS, 4 kV, Protective Separation, and selectable bandwidth.

Common mistakes

• Ordering 30P when Protective Separation / 0.1% accuracy of 40P is required.
• Expecting bipolar (±) signals — use IsoPAQ-60P for bipolar I/O.
• Assuming loop-powered — 30P needs 20…253 VAC/DC supply.
• Accessories · Signal conditioner buying guide

When to RFQ / what to tell us

1. Input and output ranges (mA/V).
2. Supply (AC/DC voltage); quantity.
3. Whether 0.1% / Protective Separation (40P) is preferred instead.

Request a Quote · Get selection help

Specs

Documents

• IsoPAQ-30P product page

FAQ

Q: Can it convert 4–20 mA to 0–10 V? A: Yes — calibrated range selection covers 0/4–20 mA and 0–10 V combinations.

Q: What should I send for a quote? A: I/O ranges, supply, quantity. Compatible with systems using INOR IsoPAQ-30P if you need a drop-in check — we do not claim authorized-dealer status.

Links

• Accessories · Signal conditioner buying guide
• Request a Quote · Get selection help