Fluke 289 True RMS Logging Multimeter

Fits electronics, plant automation, and power-distribution troubleshooting where you need a True-RMS logging DMM with TrendCapture graphical logging and a 50,000-count display.

Key advantages

TrendCapture logging — Graphical logging that stores thousands of recorded events.
50,000-count display — 1/4 VGA matrix display with white backlight.
LoZ + low-pass + peak — Ghost-voltage and VFD-friendly measurement modes; 50 Ω and large capacitance ranges.
Optional Fluke Connect / IR — Wireless connector ecosystem when remote viewing is required.

Typical applications

Intermittent fault capture on plant automation and power-distribution circuits.
Electronics troubleshooting that needs event logging, not just spot readings.
Teams that may add Fluke Connect / IR wireless later.

Selection guide

Type — True-RMS industrial logging multimeter with TrendCapture.
Display — 50,000-count 1/4 VGA matrix with white backlight.
Logging — TrendCapture graphical logging; stores thousands of recorded events.
Functions — LoZ volts, low-pass filter, peak capture, 50 Ω range, large capacitance range.
Connectivity — Optional Fluke Connect / IR wireless connector ecosystem.
Form — Handheld logging DMM with yellow holster and kickstand.

Common mistakes

Ordering a 117-class electrician DMM when TrendCapture logging is required.
Assuming Fluke Connect ships built-in — connectivity is listed as optional IR/FC ecosystem.
Skipping LoZ / low-pass filter when ghost voltage or VFD work is the duty.
Expecting a panel recorder — form factor is handheld with holster and kickstand.

When to RFQ / what to tell us

Need for TrendCapture logging vs basic DMM; event-storage expectations.
Optional Fluke Connect / IR wireless yes/no; LoZ / low-pass / peak-capture needs.
Quantity, ship-to, holster/kickstand kit confirmation.

Request a Quote · Get selection help

Specs

Spec	Value
SKU	30273
Brand	Fluke
Model	289 True RMS Logging Multimeter
Product type	logging_multimeter
Type	Fluke 289 true-RMS industrial logging multimeter with TrendCapture
Display	50,000-count 1/4 VGA matrix display with white backlight
Logging	TrendCapture graphical logging; stores thousands of recorded events
Functions	LoZ volts, low-pass filter, peak capture, 50 Ω range, large capacitance range
Connectivity	Optional Fluke Connect / IR wireless connector ecosystem
Applications	Electronics, plant automation, power distribution and electro-mechanical troubleshooting
Form factor	Handheld logging DMM with yellow holster and kickstand
Document	Fluke 289 technical data + media.fluke.com OEM product photos

Documents

Fluke 289 True RMS Logging Multimeter product page

FAQ

Q: What does TrendCapture do on 289? A: Graphical logging that stores thousands of recorded events on the 50,000-count display — state logging duty on the RFQ.

Q: Is Fluke Connect included? A: Listed as optional Fluke Connect / IR wireless connector ecosystem — say if wireless is required.

Q: What should I send for a quote? A: Logging need, FC/IR option, LoZ/filter needs, quantity, ship-to. Compatible with systems using Fluke 289 — we do not claim authorized-dealer status.

Parameter	Value
Display	50,000-count 1/4 VGA dot matrix with white backlight; TrendCapture
Basic Dc Accuracy	0.025% (True-RMS logging multimeter class)
Voltage	Up to 1000 V AC/DC; LoZ low-impedance voltage; low-pass filter for motor drives
Current	Measure up to 10 A (20 A for 30 seconds)
Capacitance	Up to 100 mF
Temperature	−200.0 °C to 1350.0 °C (−328.0 °F to 2462.0 °F)
Resistance	Megohm range up to 500 MΩ; 1 mΩ resolution class
Bandwidth	True-rms AC bandwidth 100 kHz
Logging	On-board logging with TrendCapture; isolated optical interface
Battery	6 AA alkaline; ≥100 hours typical
Size Weight	Approx. 22.2 × 10.2 × 6 cm; 870.9 g (28 oz)
Safety	CAT III / industrial logging DMM family per OEM DS
Functions	Min/Max/Avg; relative; Peak; LoZ; low-pass filter
Warranty Notes	Industrial True-RMS logging multimeter with TrendCapture