Image unavailable
Image unavailable
Panametrics
Panametrics air.IQ Moisture Analyzer Package
Quote on request
No online payment · add lines to RFQ BOM
air.IQ: −110…+20 °C dew/frost; 0–200 psig; IP66 SS; dew.IQ + IQ.probe. RFQ.
Download datasheet PDF
RFQ cart holds BOM lines only. Submit for engineering quote.
Key parameters
Measuring range
–110 to +20 °C dew/frost point (system); dew.IQ overall –110 to +60 °C capability; standard –80 to +20 °C with data to –110 °C
Accuracy
Calibrated accuracy at 77 °F (25 °C): ±2 °C above –100 °C; ±3 °C below –100 °C dew/frost point
Output
Isolated 4–20 mA / 0–20 mA / 0–2 V switch-selectable; two SPDT alarm relays; fail-safe fault relay
Supply
100–240 VAC 50/60 Hz or 24 VDC option
Process connection
1/4 in or 6 mm fittings (variant-dependent)
Display
128 × 64 matrix LCD (dew point °C/°F, ppmv with constant pressure input)
Fits clean inert-gas moisture measurement where you need a Panametrics air.IQ—wall-mounted IP66/NEMA 4X stainless package with dew.IQ display, IQ.probe, and sample system for −110 to +20 °C dew/frost point at up to 200 psig.
Key advantages
- Moisture — −110…+20 °C dew/frost, non-condensing
- Pressure — 0–200 psig process
- Package — Analyzer + probe + needle valve/filter/gauge/rotameter
- I/O — 4–20 mA / 0–2 V; two alarms; fail-safe fault relay
- Enclosure — IP66 / NEMA 4X SS with window; 100–240 VAC or 24 VDC
Typical applications
- Compressed air dryer outlet.
- N2 / argon inert gas moisture.
- Plastics / pharma dry air panels.
Selection guide
- ¼" vs 6 mm fittings
- AC vs 24 VDC
- SI display units
Common mistakes
- Condensing samples into probe.
- Hydrocarbon-laden gas without proper sample conditioning.
- Exceeding 200 psig inlet.
When to RFQ / what to tell us
- Power/fittings.
- Quantity, ship-to.
Request a Quote · Get selection help
Specs
| Spec | Value |
|---|---|
| SKU | 39531 |
| Brand | Panametrics |
| Model | air.IQ |
| Product type | Moisture Analyzer Package |
| Type | Packaged moisture analyzer + sample system (air.IQ) |
| Moisture | −110…+20 °C dew/frost point, non-condensing |
| Pressure | 0–200 psig process |
| Sample temp | 0…+50 °C |
| Gases | Clean inert gases (air, N2, argon class) |
| Outputs | 4–20 mA / 0–2 V; two alarm relays; fail-safe fault relay |
| Enclosure | IP66 / NEMA 4X stainless with window; 100–240 VAC or 24 VDC |
Documents
FAQ
Q: Moisture range? A: −110 to +20 °C dew/frost point.
Q: Max pressure? A: 200 psig.
Q: What should I send for a quote? A: Power/fittings, quantity, ship-to.
Links
| Parameter | Value |
|---|---|
| Measuring range | –110 to +20 °C dew/frost point (system); dew.IQ overall –110 to +60 °C capability; standard –80 to +20 °C with data to –110 °C |
| Accuracy | Calibrated accuracy at 77 °F (25 °C): ±2 °C above –100 °C; ±3 °C below –100 °C dew/frost point |
| Output | Isolated 4–20 mA / 0–20 mA / 0–2 V switch-selectable; two SPDT alarm relays; fail-safe fault relay |
| Supply | 100–240 VAC 50/60 Hz or 24 VDC option |
| Process connection | 1/4 in or 6 mm fittings (variant-dependent) |
| Display | 128 × 64 matrix LCD (dew point °C/°F, ppmv with constant pressure input) |
| Approvals | EMC 2004/108/EC; LVD 2006/95/EC; IP66 EN60529; NEMA 4X UL508A |
| Sensor type | Thin-film aluminum oxide (IQ.probe) with stainless sensor shield |
| Repeatability | ±0.2 °C above –100 °C; ±0.5 °C below –100 °C |
| Process Pressure | 0 to 200 psig (0 to 1,379 kPa) sample inlet |
| Sample Temperature | 0 to +50 °C (32 to 122 °F) |
| Enclosure | Wall-mounted IP66 / NEMA 4X stainless steel with clear window; IK10 impact |
| Sample Gases | Inert gases such as air, nitrogen, or argon (safe-area) |
| Data Logging | 32 GB MicroSD capacity (4 GB card included) |
| Warm Up | Meets specified accuracy within three minutes |