Image unavailable
Image unavailable
Watlow
Watlow FIREROD Immersion Heater
Cotización a solicitud
Sin pago en línea · líneas en BOM RFQ
Descargar datasheet PDF
RFQ solo líneas BOM. Envíe para cotización de ingeniería.
Parámetros clave
Mounting
Horizontal through-the-wall tank mounting
Heater Type
FIREROD cartridge immersion heater with Alloy 800 sheath
Max Watt Density
Up to 300 W/in² (46.5 W/cm²); water applications typically 150–300 W/in²
Max Voltage
240 / 480 VAC
Max Water Temperature
212 °F (100 °C) at atmospheric pressure
Process Fitting
¾ in NPT double-threaded stainless fitting, 1⅜ in (34.9 mm) long
| Parámetro | Valor |
|---|---|
| Mounting | Horizontal through-the-wall tank mounting |
| Heater Type | FIREROD cartridge immersion heater with Alloy 800 sheath |
| Max Watt Density | Up to 300 W/in² (46.5 W/cm²); water applications typically 150–300 W/in² |
| Max Voltage | 240 / 480 VAC |
| Max Water Temperature | 212 °F (100 °C) at atmospheric pressure |
| Process Fitting | ¾ in NPT double-threaded stainless fitting, 1⅜ in (34.9 mm) long |
| Leads | 6 in (152 mm) solid copper pins with silicone rubber boots; silicone-sealed lead end |
| Insulation | Compacted MgO dielectric |
| Resistance Wire | Nickel-chromium, metallurgically bonded conductor pins |
| Sheath Material | Alloy 800 standard; other sheath materials MTO |
| Recommended Media | Water and ≥90% water-soluble solutions; low watt density for viscous oils |
| Applications | Plastic reclamation, food preparation, lab equipment |
| Form Factor | Compact cartridge immersion heater replacing large screw-plug heaters |
| Special Features | High watt density in small envelope; moisture-resistant silicone seal |